
Every steamer blows steam.
This one pulls.
A handheld steamer only works if the fabric holds still. VAKU has a built-in vacuum that grips the garment taut while it steams, so the wrinkle actually has something to press against.
Suction holds it taut
No more one hand pinning the shirt while the other chases a crease.
1400W, hot in seconds
Ready in about thirty seconds. Faster than dragging the board out.
Steams and presses
Steam the body on the hanger, press the collar with the ceramic plate.
270ml tank
Roughly triple a travel steamer. Get through a rack before refilling.
You were never fighting the steam.
You were fighting the sway.
Hold a shirt on a hanger and steam it. The fabric swings away from the head, the steam scatters into the room, and you go over the same spot four times. It's not the wattage. There's nothing holding the cloth still. VAKU solves that first, then steams.
Hang it and switch on
1400W heats in about thirty seconds. No board, no setup, no clearing the table.
The vacuum grips the fabric
Suction pulls the garment flat against the ceramic panel and holds it there while you work.
One pass, wrinkle gone
Steam hits taut fabric instead of a moving target, and the suction lifts loose lint as you go.

Three parts doing the work.
Nothing else to buy.
No detachable brushes to lose, no separate iron, no board. Here's what each piece of the machine is for.
The vacuum
Pulls the garment tight against the plate so the steam has something to press into, and lifts loose lint and dust off the surface while you work.
- Holds fabric taut
- Lifts surface lint
1400W steam, 270ml tank
Full-size power in a handheld body, with a tank big enough to get through a rack of clothes instead of two shirts.
- 1400W
- 270ml
- ~30 sec heat-up
Large ceramic panel
Spreads heat evenly across a wide face instead of concentrating it in one spot, so it glides rather than catches, and presses collars and cuffs when you want them sharp.
- Ceramic
- Glide finish
- Press mode
What people actually
reach for it for.
Most of it never touches an ironing board again.
Morning shirts
Five minutes before you walk out the door.
Straight out the suitcase
Packs flat. Beats every hotel iron.
Curtains and upholstery
Steam them where they hang. Nothing comes down.
A quick lint pass
The suction picks up what a roller misses.

Fill it, hang it,
one pass down.
There is no technique to learn. Fill the tank, leave the shirt on the hanger, and run the head down the fabric. The vacuum does the part you used to do with your spare hand.
What it handles, and how.
Different cloth wants a different touch. Spot-test an inside seam first and follow the care label.
Cotton & linen
- ✓Full suction, plate flat on the cloth
- ✓Slow pass down the panel
- ✓Press collars and cuffs after
Polyester & blends
- ✓Keep the head moving, don't rest it
- ✓One pass is usually enough
- ✓Great on packed-suitcase creases
Silk & viscose
- ✓Hold the plate just off the surface
- ✓Steam, don't press
- ✓Spot-test a hem first
Curtains & upholstery
- ✓Steam in place, nothing comes down
- ✓Suction lifts settled dust and lint
- ✓Work top to bottom in sections
Why this isn't “just another”
steamer.
VAKU Vacuum Steamer
The pick- ✓Vacuum holds the garment taut so you steam with one hand.
- ✓1400W and a 270ml tank, so it clears a rack, not two shirts.
- ✓Steams and presses, with a large ceramic panel for collars.
- ✓Lifts loose lint and dust off the surface as you go.
A regular handheld
- ×You pin the fabric yourself and it still swings away.
- ×Tiny tank that needs refilling halfway through a shirt.
- ×Steam only, so the iron comes back out for collars.
- ×Lint and dust stay exactly where they were.
Everything worth asking.
What does the vacuum actually do?
Two things. It holds the fabric taut against the ceramic plate, so the steam presses into something solid instead of chasing a swinging shirt. And it lifts loose lint and dust off the surface as you work, so the garment comes off the hanger cleaner than it went on.
Does it replace my iron and board?
For most of a closet, yes. It steams shirts, dresses, jackets and curtains where they hang, and the ceramic plate presses collars and cuffs when you want a sharper edge. For knife-sharp trouser creases an iron and board still wins. Everything else it handles standing up.
Will it damage delicate fabrics?
The large ceramic panel spreads heat across a wide face rather than concentrating it in one spot, which is what scorches cloth. On silk, viscose and anything embellished, hold the plate just off the surface and steam rather than press. Spot-test an inside seam first and follow the care label.
How long does a tank last?
The 270ml tank is around triple what most travel steamers hold, so one fill gets you through a rack rather than a couple of shirts. Use filtered or distilled water if yours is hard, and empty the tank after each session to keep mineral buildup out of the head.
Can I travel with it?
It's handheld and packs flat in a carry-on. Empty the tank before flying. If you're going abroad, check the voltage against your destination before plugging in, and pack a plug adapter.
How do I keep it clean?
Empty the tank after every use and let the head cool fully before storing. If you're on hard water, run a descale cycle every month or so, and wipe the ceramic panel with a damp cloth when it's cold. That's the whole routine.
Throw out the board.
Keep the crisp shirt.
A built-in vacuum that pulls fabric taut, 1400W of steam, a 270ml tank and a large ceramic press panel. One handheld tool, backed by our 30-day money-back guarantee.
Get the VAKU Steamer$64.99Always spot-test an inconspicuous area and follow the garment's care label before steaming. Keep away from children, do not direct steam at people or pets, and unplug before filling or cleaning. Heat-up and runtime figures are approximate and vary with water hardness, ambient temperature and fabric.